Carbide tipping with Induction Heating

carbide tip applied with induction heating

Click links below to read one of our many carbide tipping application notes (after a brief, free registration)

Using Induction
Trepan Tools
Benefits

Drill bits of varying diameters (0.25" to 1.5") require a tungsten carbide cutting tip brazed to a steel drill shaft with a braze flux. A brazing temperature of approximately 1900°F. is reached with induction heating. The time required ranges from 11 seconds for a 0.5" diameter bit to 32 seconds for a 1.5" diameter bit.

An Ameritherm 20 kW RF power supply with a set of custom 4-turn helical coils (for the varying sizes) maximizes coupling and heating efficiency.

"We replaced our old tube units with Ameritherm's HOTSHOT 3.5 kW power supply for brazing carbide tips onto steel. Not only are we running our product lines at faster rates, we are also achieving more consistent quality."

Tom Wheeler
President
Muskegon Tool

image courtesy of: Muskegon Tool Industries

You benefit from induction brazing with Ambrell equipment:

Higher quality with fewer rejects
Repeatable failure-resistant joints
Faster production with quick heat-up, cool-down cycles
Precise application of heat zone
Easy integration into production lines

utm_medium	material	docid	title	blurb	regn_link	pre-reg link	ppc_link	ppc_link_2	post-reg link	onClick download	onClick, View
brazing		411-0134-10	Brochure: Precision Induction Brazing	Brazing is a process for joining two metals with a filler material that melts, flows and wets the metals’ surfaces at a temperature that is lower than the melting temperature of the two metals.	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html
brazing	steel	brazing_80	Brazing steel flange and shaft assemblies (aerospace and automotive applications)	Induction brazing is a repeatable process that isn’t as labor intensive as a flame often is. The process can heat the assembly rapidly and more energy-efficiently than a torch without the safety risks that come with an open flame	brazing_able.php	brazing.php	brazing3_able.php
brazing	steel	brazing_79	Brazing two fittings and a helical tube to create a mount	The client had been using a torch, and was dealing with inconsistent results that impacted part quality. Induction heats the assembly more quickly than the torch..	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',
brazing	aluminum	brazing_78	Brazing tubes and fittings for an air conditioning unit for the off-road market	Clients were using an oven, and because the whole part was being heated and essentially annealed, it created problems with the part. Induction only heats the braze area, and resolves that issue...	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',
brazing	steel	brazing_77	Brazing a steel and brass immersion heating element	Induction results in faster heating than a torch with faster, multipart heating to increase output...	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',
brazing	aluminum	brazing_76	Brazing an aluminum assembly for a bicycle manufacturing application	For this aluminum bicycle tube brazing application, induction heating delivers more repeatable and consistent results, while cutting client's heating time in half when compared to using a torch...	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',
brazing	steel	brazing_75	Brazing a magnetic steel tube and steel mating assembly	Heating a 0.437" (11.1 mm) outside diameter magnetic steel tube and steel mating assembly to temperature for a brazing application to create an oil tube for the railroad industry...	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',
brazing	aluminum	brazing_74	Brazing an aluminum manifold for an conditioning industry application	Precise, repeatable heating: The client wanted more precise and repeatable heating than a torch could deliver, which induction was able to achieve..	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',
brazing	steel	brazing_73	Brazing a steel tube and fitting to create an automotive valve	Customer's client was unhappy with the results from MIG welding, which drove them to look at induction as an alternative process. Induction heating proved to be a fast, repeatable heating method for the application...	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',
brazing	carbide	brazing_72	Brazing a carbide ball to a spring to create a part that controls the armature position in a motor	To heat a tungsten carbide ball and steel rod that acts as a spring to 1300 ºF (704 ºC) within five seconds for a brazing application to create a part that governs the armature position in a motor...	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',
brazing	steel	brazing_71	Brazing a steel rod and sensor housing assembly	To heat a steel rod and housing to 1400 ºF (760 ºC) within 30 seconds for a brazing application to create an assembly for a sensor...	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',
brazing	carbide	brazing_70	Heat a steel block with a cutout for carbide for a brazing application	Induction delivers improved quality and repeatability; client was using a torch and induction offered more precise, repeatable heating. In addition, this allowed the client to achieve the targeted heating time of 60 seconds, faster than what the torch could deliver...	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',
brazing	copper	brazing_69	Brazing a copper elbow tube assembly	In this copper brazing process, induction offers more precise, repeatable heating than current flame process...	brazing_able.php	brazing.php	brazing3_able.php	brazing_copper_able_cpc.php	db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',
brazing	copper	brazing_67	Brazing copper tubing and brass fittings for aerospace parts	Induction heating achieves superior process repeatability when compared to a brazing torch and a more predictable aerospace parts which enhances quality..	brazing_able.php	brazing.php	brazing3_able.php	brazing_copper_able_cpc.php	db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',
brazing	steel	brazing_66	Brazing a steel tube and fitting assembly	Induction heating is used to braze a steel connector onto a steel tube to create a hydraulic component. ...	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',
brazing	stainless steel	brazing_65	Brazing two medical tool parts into a coupling	Induction heating is used to achieve client’s goal to braze both stainless steel parts as quickly as possible with maximum repeatability...	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',	not needed
brazing	steel	brazing_64	Brazing steel tube fittings	A tube assembly is heated to the desired braze temperature in 20-25 seconds, which achieves the client's targeted cycle time of less than 30 seconds...	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',	not needed
brazing	steel	brazing_63	Brazing a magnetic steel rotor assembly	Induction is proposed to replace a hand-operated flame process requiring operator training and expertise. Induction heating delivers a precise, repeatable and reliable process. Improved joint quality is coupled with simplified operation...	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',	not needed
brazing	carbide	brazing_62	Brazing carbide insert to steel pipe gripper chuck	Induction heating is proposed to braze carbide inserts into steel blocks in the assembly of pipe gripper chuck. To replace a hand/flame process, delivering significant reduction in per-part cycles...	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',	not needed
brazing	copper	brazing_61	Brazing a copper pipe assembly seam	The customer is seam brazing copper pipes together. They will reduce the brazing of the seam down to 15-30 seconds.This customer is currently using a torch, but is not getting uniform quality	brazing_able.php	brazing.php	brazing3_able.php	brazing_copper_able_cpc.php	db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',	not needed
brazing	steel	brazing_60	Brazing a pressure switch base assembly	Induction heating provides hands-free heating that involves no operator skill for manufacturing, even distribution of heating precise and controllable heat...	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',	not needed
brazing	brass	brazing_59	Brazing brass and steel for valves and end plugs	The customer is currently using a torch to complete the braze joints. They wish to improve repeatability for a better process.	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',	not needed
brazing	brass	brazing_58	Brazing temperature sensor assemblies	A five-turn two-position helical coil is used for this brazing application. Each coil acts individually and the coils are not designed to heat simultaneously...	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',	not needed
brazing	copper	brazing_56	Brazing Copper Tubes to a Braided Stainless Steel Hose	Customer is currently using flame and a highly paid operator to complete this application. With an induction system, the customer can save approximately $20,000/year in operator cost alone, not factoring in any energy savings.	brazing_able.php	brazing.php	brazing3_able.php	brazing_copper_able_cpc.php	db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',	not needed
brazing	aluminum	brazing_55	Brazing two aluminum pipes to an aluminum evaporator core	The customer is replacing a flame process which can burn away the thin flange at the joint area and create scrap parts. By switching to induction for this application the customer is decreasing their scrap parts and also increasing their quality and production rate...	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',	not needed
brazing	brass	brazing_54	Brazing brass bellow assemblies for pneumatic regulators	Customer is replacing flame with induction to braze/solder these parts. While they are not looking to increase their production, they are looking for a repeatable and reliable process...	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',	not needed
brazing	carbide	brazing_53	Brazing a carbide to a stainless steel shaft for a digger used in mining	A three turn helical coil is used to braze the carbide to the shaft. The steel shaft is fluxed and the braze shim placed on top. The carbide tip is fluxed and placed on top of the shim, lining up the countersunk hole in the carbide. The hole is not fluxed because the flux outgases and causes the carbide to build up pressure and attempt to repel from the shaft...	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',	not needed
brazing	steel	brazing_52	Brazing a small gas delivery assembly used to manufacture needles	This is a new part for the customer and they are developing the manufacturing process for it. The customer is interested in using induction heat for their process because they are looking for finished parts which are clean and not contaminated by any flux material. By using induction to braze the part and by doing the braze under a hydrogen atmosphere, the customer can produce brazed parts with no oxidation...	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',	not needed
brazing	copper	brazing_51	Brazing copper and steel tube combinations for refrigeration and air conditioning	Customer is currently using flame brazing in a large facility for this application and will gain safety benefits with induction such as no hazardous fumes or open flames. Customer came to Ambrell because of the portable brazing system which saves the customer time and money because of the orientation and tight locations of their braze joints...	brazing_able.php	brazing.php	brazing3_able.php	brazing_copper_able_cpc.php	db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',	not needed
brazing	steel	brazing_50	Brazing a spray bar assembly used for powder coating	Customer is currently outsourcing this application. By bringing in-house they will save on inventory build-up, transportation cost, time-to-customer and money. Customer found Ambrell on the web and liked the idea that Ambrell’s application lab can prove capability before purchasing.....	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',	not needed
brazing	copper	brazing_49	Brazing vertical copper bars to a copper slip ring for refurbishing large motor assemblies	A three-turn helical coil is used to heat the slip ring. Power is applied for 25 minutes to bring the ring up to brazing temperature. The slip ring is then held at temperature as the self locating 52 vertical bars are brazed into place...	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',	not needed
brazing	copper	brazing_48	Brazing copper cable and block assembly for generator repairs	A three-turn helical combination channel coil is used to heat the assembly. The assembly is placed in the coil with a thin ceramic paper placed between the coil and copper assembly...	brazing_able.php	brazing.php	brazing3_able.php	brazing_copper_able_cpc.php	db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',	not needed
brazing	aluminum	brazing_47	Brazing aluminum electrical lug assembly	A five turn helical coil is used to braze the assembly. The parts are assembled and placed in the coil. Power is applied and a braze stick is used to braze the two parts in 25-30 seconds...	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',	not needed
brazing	carbide	brazing_46	Brazing a carbide cone to a stainless steel shaft for a gripper	A three-turn helical coil is used to braze the carbide to the stainless steel shaft. A silver solder washer is placed over the post on the shaft, the carbide is placed on the washer and flux is applied...	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',	not needed
brazing	copper	brazing_45	Brazing a copper pivot assembly	A three-turn helical coil is used to heat the base of the assembly. The copper uprights and two braze shims are placed in the grooves in the base and black flux is applied...	brazing_able.php	brazing.php	brazing3_able.php	brazing_copper_able_cpc.php	db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',	not needed
brazing	brass	brazing_44	Brazing brass faucet assembly	A two turn C shaped coil is used to braze the faucet assembly. The braze rings are placed at the joint, the parts assembled and fluxed...	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',	not needed
brazing	steel	brazing_43	Brazing a steel piston valve assembly	A five turn pancake coil is used to braze the piston valve and steel plate. The assembly was heated for 10 minutes to flow the braze and join the two pieces...	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',	not needed
brazing	steel	brazing_42	Brazing a steel die into a wire drawing guide	A two-turn helical coil is used for brazing the assembly. Two different bonding agents are tested for the brazing application. The first bonding agent used is braze paste. The assembly is heated to 1382 ºF (750 ºC) and is brazed in 45 seconds....	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',	not needed
brazing	steel	brazing_41	Braze a thin walled tube to a steel cap in a hydrogen atmosphere	A single turn helical coil is used to heat the quartz tube and the tube assembly. The tube assembly is held in place inside the quartz tube by a copper fixture and hydrogen is fed into the quartz tube...	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',	not needed
brazing	steel	brazing_40	Braze two positions on a stainless steel manifold simultaneously	A dual six turn split helical coil is used to imultaneously braze the manifold...	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',	not needed
brazing	carbide	brazing_39	Braze a carbide tip to steel cutting tool	A split helical coil is used to heat the carbide & circular steel cutter evenly for the brazing application. The circular steel cutter is placed in a vise and the carbide and braze shim are placed onto the tooth...	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',	not needed
brazing	steel	brazing_38	Braze a mount lead to a ferrule in a PAR light bulb assembly for automobiles	A split helical coil heats 2-3 ferrules at a time. The ferrules are filled with flux and the mount leads are placed inside the ferrules...	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',	not needed
brazing	copper	brazing_37	Heat a compacted litz wire bundle for stripping	A three turn helical coil is used for the wire stripping process. The litz wire bundle is placed in the coil for 3 seconds to strip the lacquer 0.75” (19mm) from the end of the bundle. The wire bundle is then scraped with a metal brush to remove the burnt lacquer...	brazing_able.php	brazing.php	brazing3_able.php	brazing_copper_able_cpc.php	db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',	not needed
brazing	copper	brazing_36	Braze electrical contacts to brass and copper bus	A five turn split helical coil is used to heat the assembly. The parts are placed 90º to the coil between the top turn and second turn with braze shims and flux.	brazing_able.php	brazing.php	brazing3_able.php	brazing_copper_able_cpc.php	db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',	not needed
brazing	carbide	brazing_35	Braze a diamond carbide tip onto band saw blade	A single turn helical coil is used for this brazing process. The saw blade and diamond carbide tip are placed in the coil...	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',	not needed
brazing	steel	brazing_34	Braze a stainless steel braided hose to copper elbow for flexible hosing	A two turn helical coil is used to heat the braided hose assembly. Braze rings are placed...	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',	not needed
brazing	steel	brazing_33	Braze an end plug on a stainless steel car grill	A three turn square shaped helical coil is used to heat the end of the grill. End plugs are inserted into the grill and the assembly is inserted into the coil for 30 seconds.	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',
brazing	steel	brazing_32	Brazing joint on pressurized heater connectors	Brazing a joint between a copper lug and nickel plated copper pins on a pressurized heater connector.	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',
brazing	steel	brazing_31	Brazing steel mold for golf ball dimple insert	Induction heating provides a no-flame process with reliable, repeatable, non contact and energy efficient heat in minimal time.	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',
brazing	steel	brazing_30	Heat aluminum for brazing an automotive assembly	A multi turn pancake coil is used to heat the joint between the aluminum tubing and boss. The joint heats to temperature in 1.5 minutes and the braze ring melts forming a clean brazed joint.	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',
brazing	steel	brazing_29	Brazing stainless steel orthodontic begg brackets	A two turn oblong helical coil is designed to heat the steel brackets which are sandwiched between the two pieces of graphite.	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',
brazing	steel	brazing_28	Brazing automotive tube assemblies	A four turn split helical coil is used to heat the steel assembly to 1400ºF (760ºC) for 85 seconds. The coil design allows for the steel fitting to expand away from the steel tube which allows braze to flow through the joint.	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',
brazing	carbide	brazing_27	Brazing carbide teeth to steel pipe jaw section	Induction heating provides hands-free heating that involves no operator skill for manufacturing, consistent, repeatable aesthetically pleasing brazes with even distribution of heating	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html	_gaq.push(['_trackEvent', 'Click - PDFb Load',
brazing	copper	brazing_26	Braze a refrigeration tube coil assembly	Induction heating provides the ability to direct heat only to the required zone, coil geometry which allows for easy loading and unloading of finished parts and the ability of coil to be used with water bath process allows for stability of the o-ring	brazing_able.php	brazing.php	brazing3_able.php	brazing_copper_able_cpc.php	db_brazing.html
brazing	steel	brazing_25	Brazing stainless steel tree injector	Induction heating provides even distribution of heating, even flow of braze alloy for an aesthetically pleasing bond and system flexibility allows for the same unit to be used for two different applications which is a cost saving.	brazing_able.php	brazing.php	brazing3_able.php		db_brazing.html
brazing	copper	brazing_23	Braze four copper bus bars together	A three-turn helical coil is used to heat the assembly. Three braze shim preforms are placed between the plates and white flux is applied to the assembly	brazing_able.php	brazing.php	brazing3_able.php	brazing_copper_able_cpc.php
brazing	carbide	brazing_22	Brazing a carbide and steel shank for a plug guage	Induction heating provides hands-free brazing which requires no special operator skills for manufacturing, precise, even heat is applied and is divided equally, between the shank and the carbide, providing an even flow of the braze alloy as the parts reach brazing temperatures.	brazing_able.php	brazing.php	brazing3_able.php
brazing	steel	brazing_21	Braze steel O-ring Face Seal fittings to a steel tube	A four-turn 2.75 inch (7.0 cm) ID helical coil is used for heating both the steel tube and the ORFS sleeve or the ORFS male connector.	brazing_able.php	brazing.php	brazing3_able.php
brazing	carbide	brazing_20	Steel-carbide brazing cutting tool	The body shim and carbide are cleaned and braze flux as applied to the entire surface of the assembly. The parts are placed together in the induction coil.	brazing_able.php	brazing.php	brazing3_able.php
brazing	carbide	brazing_19	Brazing carbide to steel for a surgical device	Compared to a stick-fed flame braze heating, induction heating provides consistently higher quality joints. This is critical for medical applications.	brazing_able.php	brazing.php	brazing3_able.php
brazing	copper	brazing_18	Brazing a Plumbing Union in Tight Quarters	Induction provides a reliable braze joint obtained under limited-access conditions, energy is applied only to the joint; little energy is lost to surrounding parts and flame is not used; no bottled gasses required	brazing_able.php	brazing.php	brazing3_able.php	brazing_copper_able_cpc.php
brazing	brass	brazing_17	Brazing a Brass Trap Block	induction heats only the material within the coil; no energy is wasted heating the surrounding materials and air; no flame or gasses required for heating	brazing_able.php	brazing.php	brazing3_able.php
brazing	copper	brazing_16	Brazing Faucet Components, Assemblies	Three helical coils are used separately to braze a range of provided parts. Parts are assembled with flux and a braze alloy and then heated.	brazing_able.php	brazing.php	brazing3_able.php	brazing_copper_able_cpc.php
brazing	copper	brazing_15	Brazing Brass Fitting to Copper Tube	For larger copper tube assemblies, the same process is used, but the braze alloy is stick-fed to the joint to prevent the alloy from flowing out of the joint.	brazing_able.php	brazing.php	brazing3_able.php	brazing_copper_able_cpc.php
brazing	carbide	brazing_14	Brazing Carbide Tips to a Meat Cutter	Due to the size of the induction coil, the process allows for precise placement of the carbides on the steel shanks	brazing_able.php	brazing.php	brazing3_able.php
brazing	copper	brazing_13	Brazing Copper Fittings to Refrigeration Valve	With induction, energy is applied only to the zone to be heated heating of the joint/braze is uniform and repeatable	brazing_able.php	brazing.php	brazing3_able.php	brazing_copper_able_cpc.php
brazing		brazing_11	Brazing a Cutting Tool Assembly	Two sets of parts are placed in the individual coils. Braze preforms are placed on the cone at the joint.	brazing_able.php	brazing.php	brazing3_able.php
brazing	carbide	brazing_10	Brazing carbide rotary file to high speed steel shanks	A multi-turn helical coil is used. The part is heated to determine the time required to reach the desired temperature and required heat pattern. I	brazing_able.php	brazing.php	brazing3_able.php