A client contacted THE LAB at Ambrell because they needed to heat a block of Haynes nickel alloy from 600 ºF (316 ºC) to 1600 ºF (871 ºC) in order to collect data on the crack growth rate for an aerospace application. THE LAB determined that an Ambrell EASYHEAT^® 2.4 kW, 150-400 kHz induction heating power supply with a single position four-turn helical coil would meet the requirements of this aerospace testing application.

A client from the aerospace industry came to THE LAB looking to heat graphite discs of variable sizes. They needed to heat the discs to 200 °F (93 °C). This was a new process for the customer and they wanted THE LAB to help them prove out their application. 

An aerospace client approached THE LAB at Ambrell with a brazing application. They tried using an oven and a torch for brazing their steel nozzle assembly, but were seeing inconsistent results. This was a low volume application, so heating time wasn't a concern. However, the location of the desired braze joint was shielded from the induction field by the lip of the nozzle, which complicated the process. 

A client from the aerospace industry came to THE LAB at Ambrell looking to upgrade their current induction system. The application involved brazing a steel assembly. They liked induction's speed and repeatability, but wanted to take advantage of the latest induction technology. Consequently, they turned to THE LAB to prove out their process on a modern Ambrell induction heating system.