Ambrell Blog

Induction Heating Insights

Sign Up Today

Automotive Applications

1 min read

Dr. Dahake to Host Webinar on Using Induction Heating for EV Manufacturing

10/6/21 2:03 PM

Join Dr. Dahake from THE LAB at Ambrell for a free webinar on "Enhancing EV Manufacturing with Induction Heating." The event will take place on October 20th at 1:15 pm and is part of the Charged Virtual Conference from Charged Electric Vehicle Magazine...

Automotive Applications automotive

1 min read

Induction Soldering a Pair of Magnetic Steel Pins

4/19/21 11:30 AM

A client from the automotive industry contacted THE LAB at Ambrell as they needed to solder a pair of magnetic steel pins/posts to manufacture an automotive component. An Ambrell EASYHEAT^TM 1.2 kW, 150-400 kHz induction heating system equipped with a...

Automotive Applications Soldering automotive induction soldering

1 min read

Curing a Coating by Heating a Steel Tube and an Aluminum Block

3/19/21 3:03 PM

A client contacted THE LAB at Ambrell because they needed to heat a steel tube and an aluminum block for a cylinder liner coating curing application in the automotive industry. THE LAB did testing and determined that an EKOHEAT^® 30 kW, 50-150 kHz...

EKOHEAT Automotive Applications curing induction curing

1 min read

Bonding Automotive Trim Vinyl Covering

1/15/21 11:27 AM

A client contacted THE LAB at Ambrell needing to heat aluminum molding to activate an adhesive coating prior to applying the vinyl. The target temperature for the application was 500 ºF (260 ºC). THE LAB determined that an Ambrell EKOHEAT^® 20 kW power...

Automotive Applications bonding induction bonding

1 min read

Guide to Induction Heating Applications in the Automotive Industry

7/17/18 3:45 PM

Ambrell has delivered systems to automotive OEMs and integrators along with Tier 1 and 2 suppliers for decades. THE LAB at Ambrell has a wealth of experience with popular automotive applications such as annealing, bonding, brazing, curing, forging,...

Automotive Applications automotive

1 min read

Induction Preheating Automotive Steel Laminate Parts (C-Lams)

4/23/18 4:55 PM

This application involved heating four steel laminate parts (c-lams) for a pre-heating application in the automotive industry. The parts, which are inserts, are heated simultaneously before robotic pick-and-place for plastic overmolding. The client was...

Automotive Applications THE LAB induction preheating