A client came to THE LAB at Ambrell with an application that involved removing urethane from a steel insert (doffer pad). THE LAB determined that an Ambrell EASYHEAT^TM 10 kW, 150-400 kHz solid state induction heating power supply would work well for this debonding application along with a workhead and coil specifically designed for this application. The assembly needed to be heated to 800 ºF (427 ºC) with the frequency set to 207 kHz.

A client came to THE LAB at Ambrell with an application that involved separating bonded stainless steel/carbon fiber assemblies by heating tang, which softens the adhesive bond. THE LAB at Ambrell determined that an Ambrell EASYHEAT^TM 2 kW, 150-400 kHz solid state induction heating power supply would work well for this debonding application along with a workhead and coil specifically designed for this application. The assembly needed to be heated to 300 ºF (149 ºC) at 200 kHz.

A manufacturer in the oil and gas industry was looking to heat rubber gaskets with metal end rings to 550 °F (288 ºC) for a release/debonding application. The end product is a subsea sealing solution. Initial testing confirmed that an EASYHEAT^TM 8.3 kW, 150-400 kHz induction heating system equipped with a remote workhead was optimal for the application.