Ambrell Blog

Induction Heating Insights

Sign Up Today

induction bonding

1 min read

Debonding the Rubber Coating from a Steel-Casted Water Valve

12/9/21 4:13 PM

A client contacted THE LAB at Ambrell because they needed to heat a steel, rubber-coated water valve to 500 ºF (260 ºC) and debond the rubber coating for recycling or refurbishing. THE LAB determined that an Ambrell EKOHEAT® 15 kW, 50-150 kHz induction...

bonding induction bonding

1 min read

De-bonding Urethane from a Steel Insert

4/19/21 4:35 PM

A client came to THE LAB at Ambrell with an application that involved removing urethane from a steel insert (doffer pad). THE LAB determined that an Ambrell EASYHEAT^TM 10 kW, 150-400 kHz solid state induction heating power supply would work well for this...

bonding debonding induction bonding

1 min read

Bonding Automotive Trim Vinyl Covering

1/15/21 11:27 AM

A client contacted THE LAB at Ambrell needing to heat aluminum molding to activate an adhesive coating prior to applying the vinyl. The target temperature for the application was 500 ºF (260 ºC). THE LAB determined that an Ambrell EKOHEAT^® 20 kW power...

Automotive Applications bonding induction bonding

1 min read

Induction Bonding Solar Panel Shingles

1/8/21 1:14 PM

A client needed to heat the stainless-steel substrate of a solar panel shingle in order to melt the polymer encapsulant, allowing two shingles to bond together. THE LAB at Ambrell determined that an Ambrell EASYHEAT^TM 1.2 kW, 150-400 kHz solid state...

bonding induction bonding

1 min read

De-bonding Stainless Steel/Carbon Fiber Assemblies

7/30/20 4:30 PM

A client came to THE LAB at Ambrell with an application that involved separating bonded stainless steel/carbon fiber assemblies by heating tang, which softens the adhesive bond. THE LAB at Ambrell determined that an Ambrell EASYHEAT^TM 2 kW, 150-400 kHz...

bonding debonding induction bonding

1 min read

Bonding a Stainless-Steel Sheet to a Soundproofing Mat

7/22/20 4:36 PM

A client came to THE LAB at Ambrell needing to bond a stainless-steel sheet to a soundproofing mat. They were using an oven, but were having quality issues so they wanted to assess induction heating. THE LAB determined that an Ambrell EASYHEAT^TM 4.2 kW,...

bonding induction bonding