How Induction Melting Works

Melting metals with induction heating provides reliable, repeatable, non-contact, safe and energy-efficient heat, eliminating heat losses and workplace dangers experienced with flame.

Contact Us

How Induction Melting Works

Melting metals with induction heating provides reliable, repeatable, non-contact, safe and energy-efficient heat, eliminating heat losses and workplace dangers experienced with flame.

Contact Us

melting-thumb

Induction melting Benefits 

Induction heating allows you to raise and hold the temperature of your material to its melting point without the use of flame or arc. A non-conducting crucible holds the charge of material to be melted while the induction coil induces eddy currents in the charge material, raising the temperature. 

Since induction heats only the charge materials, the process is precise and efficient: it does not waste energy heating a chamber, nor does it pose the safety risk of open flame.

Free Induction melting Application Notes


image: Induction Melting iron powder; pucks for analysisInduction Melting iron powder; pucks for analysis

To heat a sample of iron powder for an induction melting application; the client manufactures metal powders

image: Induction Melting of Ni based alloy samplesInduction Melting of Ni based alloy samples

Induction melting provides hands-free heating, involves no operator skill required for manufacturing, even distribution of heating and fast, controllable temperature ramp

image: Heating a crucible for Melting plasticHeating a crucible for Melting plastic

A single-position 6-turn helical coil is used to generate the required heating for application. The crucible is heated in 70 seconds with the 5kW power supply.

image: Induction Melting silicon in graphite crucible for material testingInduction Melting silicon in graphite crucible for material testing

The customer is developing a university lab experiment to induction melt silicon and is still developing the process.

image: Induction Melting lead ingots to form battery posts and connectorsInduction Melting lead ingots to form battery posts and connectors

Induction Melting 30 lb(13.6 kg) & 60 lb(27.2 kg) lead ingots to form battery posts & connectors

image: Induction Melting the end of a plastic tube to create a sealInduction Melting the end of a plastic tube to create a seal

A single turn coil encapsulated in custom blocks is used for sealing the tube. Two tubes are placed between the coil blocks and a 7lb (3.2kg) load is applied to the top of the coil.

image: Crucible Melting a variety of materials in a nitrogen atmosphereCrucible Melting a variety of materials in a nitrogen atmosphere

The crucible is heated using an induction coil with a four turn pancake at the base that extends upward into a three turn helical coil.

image: Induction Melting aluminum in a graphite crucible for castingInduction Melting aluminum in a graphite crucible for casting

Induction melting provides hands-free heating that involves no operator skill for manufacturing, repeatable, dependable results, more efficient and cost effective then gas furnace, does not heat up the manufacturing area and increases production.

image: Hermetic sealing: SS rods & glass preformsHermetic sealing: SS rods & glass preforms

Induction melting provides hands-free heating that involves no operator skill for manufacturing, amounts of glass are precisely controlled by the glass preforms and even flow of glass creates aesthetically pleasing bond.

image: Remove plastic coating from steel tubesRemove plastic coating from steel tubes

Induction melting is the only feasible way to remove the plastic coating, leaving it in an unpolluted form for recycling. It is a faster process

image: Releasing a Lens Grinding Fixture BondReleasing a Lens Grinding Fixture Bond

The bonded assembly is placed (glass up) within a helical coil which circles the bonding slug. Induction heats the material to the melting point in 5-7 seconds.

image: Induction Melting Glass for Fiber DrawingInduction Melting Glass for Fiber Drawing

To heat a metal susceptor vessel to 2200°F within 25 minutes with induction for a fiberglass melting application

image: Induction Melting of Ticonium and Nobilium ingotsInduction Melting of Ticonium and Nobilium ingots

Due to the small size of the ingots, RF induction melting was required to efficiently couple to the samples in order to provide the necessary power to initiate melting.

Frequently Asked melting Questions

Popular melting Note

Popular melting Video

Induction melting Resources:

Select from our libraries of materials to help you better understand the benefits melting with induction heating can bring to your process.

Four Ways To Contact Ambrell for Support

AMBRELL CORPORATION

1655 Lyell Avenue
Rochester, NY 14606
United States
 

Directions to Ambrell Corporation Directions

T: +1 585 889 9000

F: +1 585 889 4030

Contact Sales

Contact Orders

Contact Service

S: +1 585 889 0200

AMBRELL B.V.

Holtersweg 1
7556 BS Hengelo
The Netherlands
 

Directions to Ambrell B. V. Directions

T: +31 880 150 100

F: +31 546 788 154

Contact Sales

Contact Orders

Contact Service

AMBRELL Ltd.

Unit 6, Space Business Centre
Tewkesbury Road
Cheltenham, GLOS, GL51 9FL
United Kingdom

Directions to Ambrell Ltd.Directions

T: +44 1242 514042

F: +31 546 788 154

Contact Sales

Contact Orders

Contact Service