About Induction Heating
The science behind induction heating
Fundamentals
- What if a coil contacts a part made of nickel alloy during process?
- We've used type K thermocouples. Does this affect the measurement?
- Have you heard of any Curie-limited inductive heating applications?
- Heating thin aluminum or copper foil
- Is there a way to set up a live temperature monitoring system on induction heating?
- Are infrared sensors inaccurate at higher temperatures?
- Is induction effective for heating flowing iron powder particles?
- Workheads have capacitors in series or in parallel. Please explain.
- What changes are needed in the coil design for a moving system?
- How do I determine the frequency required to heat the material?
- Is clamping the ends of bars to heat them a good method?
- What are materials that suit themselves to a more rapid heating rate?
- Change a helical to a pancake coil for the same equipment
- Choose: a coil of more turns of thin tube or fewer turns of thicker tube?
- How and where are thermocouples used?
- Can you help me with how I might justify switching to induction - a more expensive method than flame?
- In a metal vessel heated by a coil, what will a susceptor read?
- While heating a plate, the coil-side of it is cooler. Why is that?
- Can aluminum be heated efficiently with induction?
- Can we encapsulate a coil to protect it from incidental contact?
- If the desired hardness isn't reached, reheat or adjust the parameters?
- Does induction interfere with nearby electronics?
- Have you ever used a heat tube using induction?
- How do coil intensifier plates work?
- What can induction not heat?
- What are the parts of an induction heating system?
- Can induction be used to heat water?
- Does a parallel coil arrangement require a higher amount of current ?
- Can I adjust the operating frequency of my induction system?