Knowledge Base

Back to home

Knowledge Base

About Induction Heating

About Induction Heating

The science behind induction heating

What makes up an induction heating system?

What is the operating frequency of induction?

Fundamentals

Can I adjust the operating frequency of my induction system?

Does a parallel coil arrangement require a higher amount of current ?

Can induction be used to heat water?

What are the parts of an induction heating system?

What can induction not heat?

How do coil intensifier plates work?

Have you ever used a heat tube using induction?

Does induction interfere with nearby electronics?

If the desired hardness isn't reached, reheat or adjust the parameters?

Can we encapsulate a coil to protect it from incidental contact?

Can aluminum be heated efficiently with induction?

While heating a plate, the coil-side of it is cooler. Why is that?

In a metal vessel heated by a coil, what will a susceptor read?

What if a coil contacts a part made of nickel alloy during process?

We've used type K thermocouples. Does this affect the measurement?

Have you heard of any Curie-limited inductive heating applications?

Heating thin aluminum or copper foil

Is there a way to set up a live temperature monitoring system on induction heating?

Are infrared sensors inaccurate at higher temperatures?

Is induction effective for heating flowing iron powder particles?

Workheads have capacitors in series or in parallel. Please explain.

What changes are needed in the coil design for a moving system?

How do I determine the frequency required to heat the material?

Is clamping the ends of bars to heat them a good method?

What are materials that suit themselves to a more rapid heating rate?

Change a helical to a pancake coil for the same equipment

Choose: a coil of more turns of thin tube or fewer turns of thicker tube?

How and where are thermocouples used?

Can you help me with how I might justify switching to induction - a more expensive method than flame?

See more

Safety

What precautions should operators take when working with an energized coil?

How can we limit magnetic fields outside the coil ?

Can a shop worker with a pacemaker operate induction heating equipment?

If I touch the induction coil during operation, do I get an electric shock?

cooling systems

How could we know which cooling system is better for our process?

What is the effect of dirty coolant water on an induction system?

Should we use deionized water for cooling?