Wählen Sie aus unseren kostenlosen Anwendungshinweisen

Fuse thermoplastic catheter tubes

Heating of the mandrel is from the inside out providing a smooth finish on the outside of the assemblies.

Heating Catheter Tipping Die

To heat an aluminum catheter tipping die to above 2850F within 2 to 5 seconds for the forming of catheter material.

Heating a catheter tipping die

A two turn plate concentrator coil is used to heat the die. To measure the temperature on the ID and establish the time-to-temperature relationship...

Molding a teflon catheter tip

Heat a water-cooled steel mandrel to 700°F (371ºC) to form a high quality Teflon catheter tip.

Plastic Reflow With Catheter Tubing

Heat a metal braid in a plastic catheter tube to 250°F (121.1ºC) so that another catheter tube can be bonded to it.