Hermetically sealing glass-enclosed resistors
Hermetically sealing glass-enclosed resistors
Induction heating provides precise, consistent heat to very small parts resulting in repeatable, quality seals. By heating with medium frequency, arcing (which occurs at high frequencies) is avoided.
Heating a Kovar Ferrule for Glass Soldering
Heating a Kovar Ferrule for Glass Soldering
The solder formed a relatively uniform domed seal around the fiber despite the asymmetry of the open C coil. It took under 10 seconds to heat the part to soldering temperature
Soldering a kovar piece with glass to a copper base for a photon light source
Soldering a kovar piece with glass to a copper base for a photon light source
Induction heating provides ability to use same equipment for both assembly and repair, hands-free heating that involves no operator skill for manufacturing, and uniform control of heat from part to part
Hermetic sealing of stainless steel rods with glass preforms
Hermetic sealing of stainless steel rods with glass preforms
Induction melting provides hands-free heating that involves no operator skill for manufacturing, amounts of glass are precisely controlled by the glass preforms and even flow of glass creates aesthetically pleasing bond.
To heat a stainless steel housing to 18750 F in order to fuse a piece of R6 glass to the inside of the housing.
To heat selected areas of a glass lined steel tank to 16000 F in order to perform repairs of cracks and chips.
Sobre el Calentamiento por Inducción
El calentamiento por inducción es un método para obtener calor continuo y rápido para aplicaciones industriales en las que haya que soldar o alterar las propiedades de los metales u otros materiales conductores de la electricidad. Es posible utilizar metales tales como acero, cobre, aluminio, latón o semiconductores como, por ejemplo, carbono, grafito o carburo de silicio. Para calentar materiales no conductores, tales como, los plásticos o el vidrio, se emplea la inducción para calentar un susceptor que posee conductividad eléctrica, normalmente el grafito, el cual transmite el calor hacia el material no conductor.
Consulte nuestro folleto de 4 páginas; obtenga más información sobre cómo la ciencia de la tecnología de inducción puede resolver sus problemas con el calentamiento de precisión.
