Note: Heating Surgical Tools for Coating Burn Off
Objective:
To heat surgical tools to burn-off the nylon coating; the client had been using a torch for this application
End Product:
Surgical tools
Equipment:
Ambrell EASYHEAT 1.2 kW, 150-400 kHz induction heating power supply with a workhead and coil specifically designed for this application.
Materials:
Magnetic steel surgical tools
Temperature:
N/A
Frequency:
251 kHz
Testing:
A custom-designed single position multiple-turn pancake coil was built to generate the required heating for this coating burn-off application. Initial tests were conducted to optimize the power delivered to the part. A half-inch ceramic spacer was used to lay the part over the coil. Within seconds of the power being turned on, the coating on the tool began to smoke and soon started to bubble. It took approximately five minutes to remove the entire coating from the surgical tool.
Benefits:
-
Speed: Induction met the client's time objective for coating burn off.
-
Repeatability: The client can expect the same result in the same amount of time every single time, whereas a torch is dependent on operator skill.
-
Safety: With induction, there is no open flame, making for a safer work environment.

Visit our Applications Lab to learn more about free applications testing.
1655 Lyell Ave, Rochester, NY 14606 USA | Tel: +1 585 889 9000