Note: Preheating copper bars

Objective:

To preheat two copper bars to temperature within 30 seconds; the client is looking to replace a competitor's 5 kW induction heating system that is delivering unsatisfactory results 

End Product:

Copper bars

Equipment:

Ambrell EKOHEAT 15kW, 50-150 kHz induction heating power supply with a remote workhead containing two 1.0 μF capacitors
A dual-position, multi-turn helical coil designed and developed for this heating application 

Materials:

Copper bars  1.25 x 0.375 x 3.5 in (31 x 10 x 89 mm )
Thermal indicating paint

Temperature:

750 °F (399 °C)

Frequency:

61 kHz

Testing:

A thermal indicating paint was applied to the face of the copper bar, and the bar was placed inside the coil. The part was heated for 30 seconds and it reached temperature. The next step in the process was to heat two parts in a dual-position coil. The parts were inserted into the coil and heated to temperature within 30 seconds.

In order to heat four parts to temperature within the same time period, two power supplies and two dual-position coils are required. 

Benefits:

  • Speed: Induction was able to meet their time requirements.

  • Process development: The Ambrell lab team was able to help the client develop a new heating process that achieved better results than what they saw with their old, inferior induction heating system

  • Process efficiency: With induction and the right induction partner, a time, energy and space efficient system was designed 

Preheating copper bars

Visit our Applications Lab to learn more about free applications testing.
1655 Lyell Ave, Rochester, NY 14606 USA | Tel: +1 585 889 9000