Melting
Melting iron blocks with induction heating
In this application video, we are melting iron blocks with induction using an Ambrell EASYHEAT 2 kW induction heating sy…
Melting
Melting iron blocks with induction heating
In this application video, we are melting iron blocks with induction using an Ambrell EASYHEAT 2 kW induction heating sy…
Hardening
Hardening with Induction
Induction heating is used to harden a a metal cross member. It is heated to 1600 deg. F in only 5 seconds!
Carbide heating
Brazing Carbide to Steel with Induction
In this application video a carbide is brazed to steel using an Ambrell EASYHEAT 5kW induction heating system. Complimen…
.jpg?width=480&height=270&name=Wire%20heating%20(annealing).jpg)
Heating
Wire heating
Applications for the cable and wire industry using induction heat. Induction heating provides reliable, repeatable, non-…
Shrink fitting
Shrink Fitting a Gear and Shaft
Using an Ambrell EASYHEAT 2 kW induction heating video, a gear is heated to temperature. At temperature, it'll expand en…
Forging
Forging a Steel Rod with Induction
In this application video, a steel rod is heated for forging with an Ambrell EASYHEAT induction heating system. Testing …
Soldering
Brazing a copper rod and bracket with induction heating
Melting
Levitation Melting of Copper
In this application video, an Ambrell EKOHEAT 30kW/100kHz induction heating system is used to melt a 0.5" diameter by 1"…
Soldering
Glass Sealing a Steel Kovar Ring with Induction
In this application video, an Ambrell EASYHEAT 4 kW induction heating system is used to heat a steel kovar ring for a gl…
Annealing
Annealing Stainless Steel Tubing
We use an Ambrell EKOHEAT 50 kW/30 kHz induction heating system to anneal stainless steel tubing. The tube will heat to …
Shrink fitting
Shrink Fitting a Gear
In this application video, an Ambrell EASYHEAT 6 kW induction heating power supply is used to heat the steel gear to 400…
Shrink fitting
Shrink Fitting a Steel Sleeve
In this video, a steel sleeve is heated for a shrink fitting application with an Ambrell EKOHEAT 30 kW induction heating…
Carbide heating
Brazing Carbide Tool Tips with Induction
We braze a carbide tip onto a tool using our EASYHEAT 2kW induction heating system.
Brazing
Brazing a Drill Bit with Induction
In this video, we braze a steel drill bit assembly without flame
Forging
Induction Heating a Steel Rod for Forging
Brazing
Brazing with Induction
Brazing is a heating process in which two or more like or unlike materials are joined together by means of another metal…
Heating
Heating titanium nuts with induction
In this video we will be placing these titanium nuts into the coil at a rate of one every six seconds. We're using an Am…
Heating
Burning Enamel Off A Copper Wire
In this application video, a copper wire is being heated with an Ambrell induction heating system to burn off/remove the…
Heating
Heating a welded steel tube with induction
In this application video, we are heating a welded steel tube to 1100 F with an Ambrell EASYHEAT 10 kW induction heating…
Training
EKOHEAT Training Video: Changing Taps
How to change transformer taps on your EKOHEAT Induction Heating System.
Training
EASYHEAT LI (4.2-10kW) Quick Start Video
Heating
Bending a steel pipe with induction
In this application video we're using an Ambrell EKOHEAT 100 kW / 10 kHz induction heating system to heat this magnetic …
Training
Training Video: Heating with an EASYHEAT LI (4.2-10 kW)
Annealing
Annealing Ammunition Casings
In this video, an Ambrell EKOHEAT 30 kW induction heating system is used for annealing an ammunition casing.
Heating
Pre-heating an Oil Drilling Bit
Induction heating is being used to preheat a drill bit to 1150 F to enable brazing of the carbide cutter inserts into th…
Melting
Levitation Melting Steel #2
See us heat a steel ball for levitation melting. As can be seen in this video, induction heating is a fast method of hea…
Melting
Melting Glass Solder Preforms with Induction
Two glass solder preforms are melted inside a Kovar die with an Ambrell EASYHEAT 2.4kW induction heating system in this …
Brazing
Brazing Aluminum with Induction
In this video, an aluminum pipe is being brazed to an aluminum block.
Training
EKOHEAT 10-15 Quick Start Guide Video
In this training video, learn how to setup your new EKOHEAT 10-15 kW/50-150 kHz induction heating system.
Heating
Induction Heating: Heating a Steel Gear Ring
Heating
Heating a Titanium Tube with Induction
In this application video, an Ambrell EASYHEAT induction heating system is used to heat a titanium tube to 1400 F to cha…
Carbide heating
Reclaiming carbides in a drill bit with induction heating
In this application video, a drill bit is heated to temperature to enable the removal of carbides.
Training
EASYHEAT 1.2-2.4kW: Quick Start Guide
Carbide heating
Brazing carbides to a steel metal plate
In this video we are brazing the carbide to the thin steel plate. We're using a 1 kW EASYHEAT induction heating system f…
Shrink fitting
Shrink Fitting an Aluminum Housing
In this video, an aluminum housing is heated for a shrink fitting application with an Ambrell induction heating system.
.jpg?width=480&height=270&name=Turbine%20Blade%20Tip%20Repair%20(brazing).jpg)
Heating
Turbine Blade Tip Repair
In this video, we braze a turbine blade to repair the tip
Brazing
Brazing a Steel Tube with Induction
In this video, we braze a steel tube assembly without flame
Annealing
Annealing with induction heating
Annealing is a heat treatment method used to soften metal. Induction heating provides a flameless reliable, repeatable, …
Brazing
Brazing Copper Contacts with Induction
Copper contacts will be brazed in this application video with silver copper braze. An Ambrell EASYHEAT LI 8310 is used i…
Cap sealing
Cap Sealing with Induction
Induction heating is used to seal the cap on a plastic bottle.
Heating
Heating Steel Molds for Plastic Tube Forming with Induction
An Ambrell EASYHEAT 2 kW power supply was used with a two-position coil in this video. The steel molds successfully heat…
Carbide heating
Brazing Carbides to Steel - Oil Industry
Catheter tipping
Catheter Tipping With Induction
Using induction heating to prepare a catheter tip.
Training
Install 003-0349 Card on an EASYHEAT Small
Training
Heating with an EASYHEAT (1.2-2.4kW) Training Video
Learn how to heat with an EASYHEAT model. This video is intended to be viewed after the EASYHEAT Quick Start Video.
Soldering
Soldering a tube to a fitting
In this application video we are heating the tube to the fitting for a soldering application. The end product is a fauce…
Annealing
Annealing a Steel Tube
A steel tube is heated to 1300F in one second for an annealing application.
Training
EKOHEAT Training Video: Three Modes for Heating Parts
Learn about the three modes for heating parts on your Ambrell EKOHEAT power supply.
Heating
Induction Heating Overview
Brazing
Brazing Steel to Copper in Atmosphere
We braze steel to copper in a controlled atmosphere.
Soldering
Soldering Circuit Boards
Soldering is the process of joining metals by means of alloys that melt between 350 ºF-700 ºF.
Annealing
Annealing a brass tube
In this application video, we are annealing a brass tube with an Ambrell EASYHEAT induction heating system.
Shrink fitting
Shrink Fitting a Gear #2
In this application video, a gear is heated to temperature for a shrink fitting application. Once the gear was heated to…
Brazing
Brazing a tube and a fitting with induction
Heating
Melting a Battery Terminal
In this video, an Ambrell EKOHEAT 45 kW induction heating system is used to melt the terminal of a battery in a few seco…
Annealing
Annealing a Copper Strip with Induction
In this application video, we are annealing a copper strip with an Ambrell EASYHEAT 4.2 kW induction heating system.
Training
EASYHEAT 1.2-2.4kW: Configuring to Start from the Rear Panel
Learn how to configure an EASYHEAT (1.2-2.4kW) to start from the rear panel.
Heating
Preheating for Hot Heading with Induction
Induction heat is used for preheating bolt heads prior to forming bolt and screw heads, lips on plates, hollow parts, fa…
Melting
Induction Levitation Melting with a Special Coil
Metal is levitated and melted with induction heat! This can be used for manufacture in the jewelry, dental, electronics,…
Soldering
Soldering a Fiber onto a Pin
In this application video, a part is preheated for soldering a fiber onto a pin application with an Ambrell induction he…
Training
EASYHEAT 1.2-2.4kW: Controlling the Setpoint using a Remote Input
Learn how to configure the EASYHEAT 1.2-2.4kW to control the setpoint using the remote input on the rear of the unit.
Cap sealing
Cap Sealing Bottles with Induction
In this cap sealing application video, a channel coil is used with an Ambrell induction heating system. Heating takes ju…
Soldering
Soldering Glass Feedthroughs
This heating application is done on a Kovar assembly using an induction heating power supply.
Heating
Getter Firing With Induction
Watch how induction heating is used to fire this vacuum tube getter.
Annealing
Annealing the Tip of a Steel Part
In this video, an Ambrell EASYHEAT induction heating system is used to anneal the tip of a steel part in just three seco…
Hardening
Hardening Saw Teeth with Induction
In this application video, an Ambrell EKOHEAT 45kW/100 kHz induction heating system is used to harden the teeth of a saw…
Annealing
Annealing Magnetic Steel Strips
We are annealing a 5in magnetic steel strip using an Ambrell EASYHEAT 4.2 kW induction heating system
Brazing
Brazing Brass Block to Copper Tubes
In this application video, a brass manifold block is being heated for a brazing application. Copper tubes are being braz…
Soldering
Soldering a Radiator Cap Assembly
In this induction heating application video, we have a radiator cap assembly pre-fluxed with a solder ring in the joint …
Annealing
Induction Heating Application: Annealing a Steel Ring
Using an EASYHEAT LI 4.2kW induction heating system, a steel ring was heated to just over 1500°F in less than two second…
Training
Training Video | Configure Firmware for RS-485 Communications
In this training video, learn how to configure firmware for RS-485 communications on an Ambrell EASYHEAT Small induction…
Heating
Preheating for Hard Facing with Induction
In this application video, a part is preheated for a hard facing application with an Ambrell induction heating system. T…
Soldering
Soldering grounding lugs for power transmission
In this application video they are soldering a copper lug and wires with an Ambrell EKOHEAT 15 kW induction heating syst…
Forging
Preheating a Steel Bar for Forging with Induction
A steel bar is preheated to 1700 F for forging in this application video. An Ambrell EASYHEAT 10kW induction heating sys…
Hardening
Hardening a Socket with Induction
Using an Ambrell EKOHEAT induction heating system, a socket is heated and quenched in order to harden it.
Annealing
Annealing a Steel Part with Induction
This application video involves annealing a steel tool using an Ambrell EKOHEAT induction heating power supply with a th…
Heating
Heating a steel strip with induction heating
Melting
Levitation melting an alloy
A slug of alloy is placed into the specially-designed levitation coil and induction heat is applied with our EASYHEAT 83…
Corporate
THE LAB at Ambrell
Brazing
Brazing Steel to Brass
We use induction heating to braze a brass fitting to a steel fitting
Brazing
Brazing Steel to Steel with Induction
Modern induction heating provides reliable, repeatable, non-contact and energy-efficient heat in a minimal amount of tim…
Training
EASYHEAT LI: Changing Capacitors
Training
From the Box to the Bench -- An Ambrell EASYHEAT 1.2-2.4kW Training Video
Corporate
Corporate Video: Ambrell Induction Heating Solutions
Brazing
Induction Heating: Brazing steel cable
Soldering
Soldering a Copper Plate Assembly
In this application video, a copper plate assembly is soldered in less than five seconds with an Ambrell EASYHEAT induct…
Training
EASYHEAT 1.2-2.4kW: Changing Transformer Taps
Learn how to change transformer taps on an EASYHEAT (1.2-2.4kW) induction heating system.
Soldering
Soldering a copper disc
In this application video we are soldering copper rings and plate inserts with an Ambrell EASYHEAT LI induction heating …
Heating
Pipe bending
Induction heating is applied to this pipe bending process in which the 1/2"-thick wall of a 16" steel tube is heated by …
Soldering
Soldering Kovar Ferrule to Fiber Optic Cable
In this induction heating application a kovar ferrule is soldered onto a fiber optic cable.
Training
EASYHEAT 1.2-2.4 kW: Changing the Capacitance Value
How to change the capacitance value after changing caps on an EASYHEAT (1.2-2.4kW) induction heating system.
Brazing
Brazing Brass to Brass
Brazing is a heating process in which two or more like or unlike materials are joined together by means of another metal…
Soldering
Soldering a pipe to an elbow
Flux is applied to the brass elbow and the copper pipe. The 2 inch coupling is fully soldered in about 40 seconds with a…
Melting
Melting Zinc Off of a Bar with Induction
In this video we are melting the zinc off of a 1” (25.4 mm) section of this bar with induction. We are using an Ambrell …
Heating
Preheating a Steel Plate With Induction
In this application video, a steel plate is preheated to 1700 F for a forging application. An Ambrell EASYHEAT 10kW indu…
Brazing
Brazing a Copper Rod and a Disc with Induction Heating
Hardening
Hardening a Hole Saw with Induction
A hole saw is heated to 1200C within 5 seconds with an Ambrell EKOHEAT 45kW induction heating system for a hardening app…
Training
EASYHEAT LI Quick Start Guide (with Subtitles)
Training
EASYHEAT 1.2-2.4kW: Verifying the Heat Station Model Number
In this training video you will learn how to verify that the heat station model number is set correctly on an EASYHEAT
Melting
Levitation Melting Using Induction Heating
Heat staking
Metal-Plastic Insertion of Brass Inserts with Induction
In this video, two brass inserts are heated to temperature with an Ambrell EASYHEAT 2 kW induction heating system.
Hardening
Hardening a Fastener Tip with Induction
Using an Ambrell EASYHEAT 1kW induction heating system, fastener tips are heated to temperature and quenched in order to…
Brazing
Induction Copper Brazing Application Video
Training
EASYHEAT Small (1.2-2.4 kW) Quick Start Guide (Subtitles)
Brazing
Brazing brass valve assembly
The parts are pre-brazed and black flux is applied. Braze pre-form rings are applied and the assembly is placed within t…
Brazing
Brazing a 6-branch hydraulic assembly
The core and six branches of this manifold are assembled, flux is applied and braze pre-form rings are applied.
Annealing
Annealing a Tube with Induction Heating
Heating
Tempering threads of a steel stud with induction heating
Hardening
Hardening a Cutting Tool with Induction
In this application video we are through-hardening a part for a cutting tool. A pyrometer is set up on the lower left-ha…
Brazing
Brazing a Brass Assembly
An assembly is brazed with Ambrell EASYHEAT 2.4kW induction heating system. This process proved beneficial compared to t…
Soldering
Soldering a reducer assembly
The parts are assembled with a ring of solder and flux is applied. The assembly is placed within the induction heating c…
Soldering
Soldering a rivet onto a steel tank cap
In this application video, we are soldering a rivet onto a steel tank cap with an Ambrell EASYHEAT induction heating sys…
Brazing
Brazing a tube to a fitting: gas flow assembly
Corporate
Ambrell and SG Induction at MECSPE 2024
Training
Using Frequency Offset on the EASYHEAT LI
This video demonstrates the frequency offset feature on the Ambrell EASYHEAT LI induction heating system. This feature a…
Brazing
Brazing a three-piece valve fixture
The pieces of the fixture are assembled, flux and braze pre-form rings are applied and the assembly is placed in the coi…
Corporate
Ambrell Induction Nanoparticle Heating Kit
Training
eVIEW Training Video Series: Configuring the DAQ and taking analog readings (CH 3)
Brazing
Brazing a brass fitting to a brass tube with induction
Training
EASYHEAT 1.2-2.4kW: Configuring for One or Two Button Start
Learn how to configure your EASYHEAT (1.2-2.4kW) for a one button (press to heat) or two-button (on/off start/stop) star…
Brazing
Brazing a steel rod to a steel base with induction heating
Training
EASYHEAT 1.2-2.4kW: Verifying the Values of Capacitors Inside
Learn how to verify the values of the capacitors inside the EASYHEAT (1.2-2.4kW) heat station.
Heating
Heating a Bracelet to Darken It with Induction Heating
Corporate
Introducing Ambrell SmartCARE
Soldering
Soldering a Fuel Pump Assembly
In this application video, a fuel pump assembly is soldered with an Ambrell EASYHEAT 2.4kW induction heating system in l…
Annealing
Induction Heating Five Mandrels for an Annealing Application
Training
eVIEW Training Video Series: Background and Requirements (CH 1)
Heating
Forming steel parts with induction
In this application video, a steel part is heated to 1100°F for a forming application. An Ambrell EKOHEAT 65 kW/100 kHz …
Corporate
eVIEW Overview Video
Brazing
Brazing a sleeve onto a door handle
Heating
Preheating for Fastener Thread Rolling
In this application video from THE LAB at Ambrell, preheating for fastener thread rolling takes place on an Ambrell EKOH…
Brazing
Brazing a copper assembly with induction heating
Curing
Curing Epoxy on a Steel Valve
In this video a steel valve is heated to 500 F for an epoxy curing application using an Ambrell EASYHEAT 10kW induction …
Hardening
Case Hardening with Induction
In this application video, a steel part is heated to 1600 F in just one second for a case hardening application. An Ambr…
Carbide heating
Brazing Carbide to Copper with Induction
In this application video we are brazing the carbide to copper using an Ambrell EASYHEAT 1 kW induction heating power su…
Hardening
Hardening a Steel Fitting with Induction
In this application video, a steel fitting is heated using an Ambrell EASYHEAT induction heating system. The duration of…
Heating
Roller Heating Setup
Corporate
Induction Heating is a Green Technology
Induction heating does not consume fossil fuels, nor does it produce any hazardous emissions or carbon dioxide (CO2). In…
Carbide heating
Heating a Carbide Sample
Heating
Induction Heating Steel Weights
In this application video from THE LAB at Ambrell, small steel weights/clips are heated to be affixed to fan blades.
Brazing
Brazing a copper bus to a silver coated contact with induction heating
Training
eVIEW Training Video Series: Installation (CH 2)
Brazing
Brazing three assemblies
Training
Changing Taps on an EASYHEAT (1.2-2.4 kW) (Subtitles)
Heating
What is Induction Heating?
Corporate
Why visit Ambrell booth N6042 at IMTS?
Hardening
Heating a Bar for Hardening
In this video, a bar is hardened with an Ambrell EASYHEAT induction heating system. THE LAB at Ambrell assessed the appl…
Corporate
Ambrell at MFG4 2016
Corporate
Debonding tubes from a compressor head with induction
Training
Heating with an EASYHEAT Small (Subtitled Version)
Corporate
Unternehmensvideo (Ambrell)
Corporate
Ambrell Vídeo Corporativo
Corporate
DSCN7658
Training
EKOHEAT 135 Induction Heating Solution
Heating
Induction Heating Application Video
Corporate
Ambrell Video Corporativo
Corporate
Vidéo d'entreprise (Ambrell)
Heating
Tempering a Cutting Tool with Induction
Corporate
Ambrell's eVIEW
Corporate
Ambrell Corporativo Vídeo
Corporate
THE LAB in Mexico Ribbon Cutting (Ambrell)
Corporate
Induction is Green -- Induction in Action
Training
Training Video | Low Level Scan-Learn Start Frequency
Ambrell VPA power supplies have two utilities useful for determining tap and choke selection as well as the appropriate …
Curing
Curing Epoxy on an audio Speaker
In this video an epoxy curing application is used on a 3 inch diameter speaker using an Ambrell induction heating system…
Forging
Fastener Preheating for Forging
In this application video, an alloy is preheated for forging to manufacture fasteners with an Ambrell EASYHEAT induction…
Forging
Forging a Steel Rod with Induction #2
In this application video, we are heating a steel tube for forging with an Ambrell EKOHEAT 15 kW induction heating syste…
Shrink fitting
Shrink Fitting a Ring onto a Housing
In this induction heating application video from THE LAB at Ambrell, a ring is being shrink fitted onto the housing. An …
Heat staking
Staking a Steel Rod with Induction
The metal to plastic bonding process requires fast, accurate and repeatable heating to avoid such quality defects as fla…
Staking Brass Threaded Inserts to Plastic Manifold
In this application tested by THE LAB at Ambrell, a threaded brass insert is heated to the required temperature and push…