Catheter Tipping With Induction

Ambrell has offered catheter tipping solutions for the medical industry since 1986. Our expertise in developing these applications is applied by medical instrument manufacturers worldwide.

Fuse thermoplastic catheter tubes

Heating of the mandrel is from the inside out providing a smooth finish on the outside of the assemblies.

Heating Catheter Tipping Die

To heat an aluminum catheter tipping die to above 2850F within 2 to 5 seconds for the forming of catheter material.

Heating a catheter tipping die

A two turn plate concentrator coil is used to heat the die. To measure the temperature on the ID and establish the time-to-temperature relationship...

Molding a teflon catheter tip

Heat a water-cooled steel mandrel to 700°F (371ºC) to form a high quality Teflon catheter tip.

Plastic Reflow With Catheter Tubing

Heat a metal braid in a plastic catheter tube to 250°F (121.1ºC) so that another catheter tube can be bonded to it.

About Induction Heating

Induction heating is a fast, efficient, precise and repeatable non-contact method for heating metals or other electrically-conductive materials. The material may be a metal such as brass, aluminum, copper or steel or it can be a semiconductor such as silicon carbide, carbon or graphite. To heat non-conductive materials such as plastics or glass, induction is used to heat an electrically-conductive susceptor, typically graphite, which then transfers the heat to the non-conducting material.

Read our 4-page brochure; learn more about how the science of induction technology can solve your precision heating problems.

Read 'About Induction Heating'

Induction Heating Work Coils

The work coil is the component in the induction heating system that defines how effective and how efficiently your work piece is heated.

Read our informative brochure explaining the fundamentals of induction coils and their design.

Catheter Tipping With Induction