THE LAB at Ambrell tested an application that involved heat sealing both ends of a stainless-steel heater assembly to 300-500 ºF (149-260 ºC) to melt glass preforms. THE LAB determined that an Ambrell EASYHEAT^TM 2 kW induction heating system with a two-turn elongated helical coil would be the right solution for this melting application. 

THE LAB at Ambrell tested an application that involved heating a graphite crucible to 1,292 ºF (700 ºC) to melt aluminum to liquid form for a casting application. THE LAB determined that an Ambrell EKOHEAT^® 50 kW induction heating system with a ten-turn helical coil would be the optimal solution for this casting application. 

A client contacted THE LAB at Ambrell needing to melt ingots of Ticonium and Nobelium in a crucible. THE LAB determined that an Ambrell EASYHEAT^TM 5 kW induction heating system with a five-turn helical coil would be the right solution to heat the silica crucible and meet the objectives of the application. The target temperature was 2,650 ºF (1,454 ºC) for the Nobelium and 2,450 ºF (1,343 ºC) for the Ticonium.

A client contacted THE LAB at Ambrell needing to repeatably superheat molten metal with induction heating for a different sample mass. THE LAB determined that an Ambrell EASYHEAT^TM 10 kW, 150-400 kHz induction heating system with single position nine-turn helical coil would be the right solution for the client.