Ambrell Blog

Induction Heating Insights

Sign Up Today

bonding, de-bonding

Debonding with an Ambrell EASYHEAT Induction System

2 min read

Removing Rubber Bonded to Steel Using Induction Heating

Objective Removing rubber that has been permanently bonded to steel or other ferrous substrates can...

Removing Tin Coating from Copper Bus Bar with Induction Heating

1 min read

Removing Tin Coating from Copper Bus Bar with Induction Heating

Objective An engineering firm had a new process that required the removal of a coating of...

Bonding a Plastic Sleeve to a Stainless-Steel Handle

1 min read

Bonding a Plastic Sleeve to a Stainless-Steel Handle

Objective A client in the food industry needed to heat the end of a stainless-steel handle with a...

Debonding the Rubber Coating from a Steel-Casted Water Valve

1 min read

Debonding the Rubber Coating from a Steel-Casted Water Valve

Objective A client contacted THE LAB at Ambrell because they needed to heat a steel, rubber-coated...

De-bonding Urethane from a Steel Insert

1 min read

De-bonding Urethane from a Steel Insert

Objective A client came to THE LAB at Ambrell with an application that involved removing urethane...

Bonding Automotive Trim Vinyl Covering

1 min read

Bonding Automotive Trim Vinyl Covering

Objective A client contacted THE LAB at Ambrell needing to heat aluminum molding to activate an...

Induction Bonding Solar Panel Shingles

1 min read

Induction Bonding Solar Panel Shingles

Objective A client needed to heat the stainless-steel substrate of a solar panel shingle in order...

De-bonding Stainless Steel/Carbon Fiber Assemblies

1 min read

De-bonding Stainless Steel/Carbon Fiber Assemblies

Objective A client came to THE LAB at Ambrell with an application that involved separating bonded...

Bonding a Stainless-Steel Sheet to a Soundproofing Mat

1 min read

Bonding a Stainless-Steel Sheet to a Soundproofing Mat

Objective A client came to THE LAB at Ambrell needing to bond a stainless-steel sheet to a...

Heating Steel Cannulas for a Bonding Application

1 min read

Heating Steel Cannulas for a Bonding Application

Objective A medical device manufacturer came to THE LAB at Ambrell needing to heat steel cannulas...

Induction Bonding Metal-to-Plastic for Dental Tools

1 min read

Induction Bonding Metal-to-Plastic for Dental Tools

Objective A customer from the dental industry needed to heat a magnetic steel post to 300 °F (149...

1 min read

Induction Bonding Stainless-Steel Needle to Plastic Shank

Objective A customer needed to heat a stainless-steel needle within a plastic shank to form a...

Four Ways To Contact Ambrell for Support

AMBRELL CORPORATION

1655 Lyell Avenue
Rochester, NY 14606
United States

 Directions to Ambrell Corporation Directions
T: +1 585 889 9000
F: +1 585 889 4030
Contact Sales
Contact Orders
Contact Service

AMBRELL B.V.

Holtersweg 1
7556 BS Hengelo
The Netherlands

Directions to Ambrell B. V. Directions
T: +31 880 150 100
F: +31 546 788 154
Contact Sales
Contact Orders
Contact Service

AMBRELL Ltd.

Front Suite, 1st Floor, Charles House
148-149 Gt Charles Street
Birmingham, B3 3HT
United Kingdom

T: +44 1242 514042
F: +31 546 788 154
Contact Sales
Contact Orders
Contact Service