Ambrell Blog

Induction Heating Insights

Sign Up Today

medical device manufacturing

1 min read

Ambrell to Exhibit at MD&M South in Charlotte

6/9/22 10:31 AM

Ambrell will be exhibiting at MD&M South for the first time next week. The event will be held June 14-16 at the Charlotte Convention Center in Charlotte, NC and we'll be located in booth 2139. In the booth we'll have an EASYHEAT on display and Dr. Dahake...

Trade Shows medical device manufacturing

1 min read

Ambrell Returns to MD&M West

4/7/22 7:25 PM

Ambrell will be exhibiting at MD&M West in Anaheim next week. The event will be held on April 12-14 at the Anaheim Convention Center and we'll be located in booth 3177. In the booth we'll have an EASYHEAT on display and the team will be available to...

Trade Shows medical device manufacturing

1 min read

Induction Heat Staking an Arthroscopic Device

5/21/20 1:39 PM

A manufacturer in the medical industry came to THE LAB at Ambrell with a heat staking application involving a arthroscopic device. They needed to use induction to bond the device's sheath to the collet. Fast, localized heating that didn't impact...

Metal-to-Plastic Induction Heating heat staking medical device manufacturing medical industry

1 min read

Heating Steel Cannulas for a Bonding Application

5/13/20 4:23 PM

A medical customer came to THE LAB at Ambrell needing to heat steel cannulas for a bonding application. THE LAB determined that an Ambrell EASYHEAT^TM 4.2 kW, 150-400 kHz solid state induction heating power supply would work well for this bonding...

bonding induction bonding medical device manufacturing

1 min read

Ambrell Announces Induction Heating Guide for the Medical Industry

4/30/20 9:53 AM

Ambrell Corporation, an inTEST Company and a leading manufacturer of induction heating solutions worldwide, announced today the publication of an extensive guide for induction heating applications specifically for the medical industry.

Induction Heating medical device manufacturing medical industry

1 min read

Induction Bonding Metal-to-Plastic for Dental Tools

4/27/20 4:35 PM

A customer from the dental industry needed to heat a magnetic steel post to 300 °F (149 °C) for a bonding application. They turned to THE LAB at Ambrell to prove out their metal-to-plastic bonding application. THE LAB at Ambrell determined that an...

bonding dental tools induction bonding medical device manufacturing