Ambrell Blog

Induction Heating Insights

Sign Up Today

Shrink Fitting (2)

1 min read

Ambrell's New Induction Shrink Fitting Brochure

6/5/20 4:25 PM

We're pleased to announce that a new brochure which highlights induction shrink fitting is now available. This brochure, which is titled "Improved Shrink Fitting with Induction Heating," highlights ten shrink fitting applications that were tested by THE...

Shrink Fitting induction shrink fitting

1 min read

Shrink Fitting an Automotive Aluminum Motor Housing

5/11/20 1:32 PM

A client reached out to THE LAB at Ambrell because they needed to heat an aluminum motor housing to 464 ºF (240 ºC) for a shrink fitting application. The system will be used within an automated line. THE LAB determined that an Ambrell EKOHEAT^® 45 kW,...

Shrink Fitting induction shrink fitting

1 min read

Shrink Fitting a Carbide Ring into a Valve Seat

3/31/20 12:32 PM

A client contacted THE LAB at Ambrell because they needed to shrink fit a carbide ring into a valve seat. The materials that were used during testing were a steel valve seat and a carbide ring. THE LAB determined that an EASYHEAT^TM 10 kW, 150-400 kHz...

Shrink Fitting induction shrink fitting

1 min read

Shrink Fitting Magnetic Steel Pistons

10/3/19 11:06 AM

A manufacturer of pistons approached THE LAB at Ambrell with a shrink fitting application. They had been using an inexpensive portable induction unit, but found it unreliable for their application. Their application involved heating magnetic steel...

Shrink Fitting induction shrink fitting

1 min read

Heating Hammer Bits for Shrink Fitting

8/29/19 4:21 PM

A client in the oil and gas industry came to Ambrell with a shrink fitting application. They had been using a cold method for inserting carbide buttons into hammer bits, but wanted to look to induction heating. They took advantage of THE LAB at...

Shrink Fitting induction shrink fitting

1 min read

Shrink Fitting a Magnetic Steel Gear

7/24/19 2:19 PM

A manufacturer of power generation equipment approached THE LAB at Ambrell with a shrink fitting application. They had been shrink fitting a magnetic steel gear with an oven, but that oven took over two hours to heat the gear to 550 °F (288 °C). Their...

Shrink Fitting induction shrink fitting

Prev 1 2 3 Next

AMBRELL CORPORATION

1655 Lyell Avenue
Rochester, NY 14606
United States

T: +1 585 889 9000

F: +1 585 889 4030

Contact Service

AMBRELL B.V.

Holtersweg 1
7556 BS Hengelo
The Netherlands

Directions to Ambrell B. V. Directions

T: +31 880 150 100

F: +31 546 788 154

Contact Service

AMBRELL Ltd.

Unit 6, Space Business Centre
Tewkesbury Road
Cheltenham, GLOS, GL51 9FL
United Kingdom

T: +44 1242 514 042

F: +31 546 788 154

Contact Service