1 min read

Induction Heating a Stainless Steel Tube for Swaging or Shaping

A client needed to heat 0.06" (1.5 mm) stainless steel tubing to 1950 oF (1066 oC) prior to swaging...

1 min read

Removing Tin Coating from Copper Bus Bar with Induction Heating

An engineering firm had a new process that required the removal of a coating of insulation. It was...

2 min read

6 Ways to Improve Induction Heating Uniformity via Coil Design

Induction heating uniformity issues can cause a variety of problems with part quality. We often see...

1 min read

Induction Shrink Fitting a Steel Part into a Casing

A client needed to heat steel parts on the inside diameter in order to shrink fit them into each...

1 min read

Shrink Fitting an Automotive Aluminum Motor Housing

A client reached out to THE LAB at Ambrell because they needed to heat an aluminum motor housing to...

1 min read

Application Insight: Preheating Castings and Rods for Welding

A client from the automotive industry wanted to assess moving from torches to induction for a...

1 min read

Bonding a Plastic Sleeve to a Stainless-Steel Handle

A client in the food industry needed to heat the end of a stainless-steel handle with a plastic...

1 min read

Heating Steel Coated Copper Wire with Induction

A client contacted THE LAB at Ambrell looking to heat copper wire to 500 °F (260 °C) for a wire...

1 min read

Induction Heating Non-Magnetic Steel Tubing

A client in the energy storage technology market turned to Ambrell because they needed to heat...

Ambrell Sells EKOHEAT for Tube Annealing

A metals manufacturer recently purchased an Ambrell EKOHEAT® 50 kW induction heating system for a...

1 min read

Brazing Carbide to Steel for a Surgical Device

A client from the medical industry came to THE LAB at Ambrell looking to braze carbide to steel as...

1 min read

Induction Brazing Steel Assemblies

A client contacted THE LAB at Ambrell because they were implementing a new brazing process. They...