How is induction heating used in catheter tipping?
Ambrell has offered catheter tipping solutions for the medical industry since 1986. Our expertise in developing these applications is applied by medical instrument manufacturers worldwide.
Induction generates an electromagnetic field in a work coil that induces currents in the conductive material of a workpiece placed within or near the coil. Friction from these currents elevates the temperature of the workpiece to be heated.
Induction catheter tipping Benefits
-
Meets tight production tolerances with precise localized heat to small areas creating pinpoint accuracy
-
Increases production rates with faster heating cycles
-
Reduces defect rates with repeatable, reliable heat
-
Eliminates variability from operator-to-operator, shift-to-shift
-
Maintains metallurgical characteristics of the individual metals
catheter tipping Application Notes
Select from our collection of catheter tipping notes, taken from years supporting our customers. Read how we helped to solve their process heating challenges.
Fuse thermoplastic catheter tubes
Heating of the mandrel is from the inside out providing a smooth finish on the outside of the assemblies.
To heat an aluminum catheter tipping die to above 285F within 2 to 5 seconds for the forming of catheter material.
Heating a catheter tipping die
A two turn plate concentrator coil is used to heat the die. To measure the temperature on the ID and establish the time-to-temperature relationship...
Heat a water-cooled steel mandrel to 700°F (371ºC) to form a high quality Teflon catheter tip.
Plastic Reflow With Catheter Tubing
Heat a metal braid in a plastic catheter tube to 250°F (121.1ºC) so that another catheter tube can be bonded to it.
Is Catheter Tipping with Induction the Least Expensive Process?
Depending on the specific medical requirements and frequency of use induction might not be the most cost effective way to produce catheters. The initial investment and training required could make other heating technologies more financial viable when considering lower output volumes
Will Catheter Tipping with Induction Reduce Production Costs?
When high production capacity is required induction heating will reduce down time / setup time / increased speed and higher product quality with less wastage.
Popular Catheter-Tipping Note
Popular Catheter-Tipping Video
More catheter tipping Resources
Our Induction catheter tipping Systems and Equipment
Four Ways To Contact Ambrell for Support
AMBRELL CORPORATION
1655 Lyell Avenue
Rochester, NY 14606
United States
F: +1 585 889 4030
AMBRELL B.V.
Holtersweg 1
7556 BS Hengelo
The Netherlands
AMBRELL Ltd.
Unit 6, Space Business Centre
Tewkesbury Road
Cheltenham, GLOS, GL51 9FL
United Kingdom
F: +31 546 788 154