Brett Daly

1 min read

Curing a Coating by Heating a Steel Tube and an Aluminum Block

A client contacted THE LAB at Ambrell because they needed to heat a steel tube and an aluminum...

1 min read

Induction Annealing the End of Metal Stamp Sets

Objective A company contacted THE LAB at Ambrell to anneal the ends of metal stamp sets of various...

1 min read

Heating Surgical Tools for Coating Burn Off

A client contacted THE LAB at Ambrell because they needed to heat surgical tools to burn off the...

1 min read

Sealing an Aluminum Cap Seal on a Plastic Jug

Objective THE LAB at Ambrell tested an induction cap sealing application involving heating aluminum...

3 min read

inTEST Experiences Strong Growth in the Electric Vehicle Market

inTEST Corporation (NYSE American: INTT), a global supplier of innovative test and process...

Industry 4.0 Report Now Available

Manufacturers are creating smart factories across the globe with impressive throughput and enhanced...

1 min read

Induction Brazing Fishhooks

A client came to THE LAB at Ambrell needing to heat two pairs of fishhooks inside a steel tube for...

1 min read

Induction Brazing Copper Busbars

A client in the high voltage contracting business wanted to move away from flame heating, so they...

1 min read

Bonding Automotive Trim Vinyl Covering

Objective A client contacted THE LAB at Ambrell needing to heat aluminum molding to activate an...

1 min read

Induction Bonding Solar Panel Shingles

Objective A client needed to heat the stainless-steel substrate of a solar panel shingle in order...

1 min read

Shrink Fitting a Carbon Graphite Ring Insert Into an Outer Steel Band

A client contacted THE LAB at Ambrell needing to heat a steel band to 1000 ºF (538 ºC) and insert a...

1 min read

Induction Tempering a Spring

A client contacted THE LAB at Ambrell because they needed to temper a spring by heating it to 300...