Ambrell Blog

Ambrell and EPGA Induction to Host Open House at New Lab in Mexico

Ambrell and EPGA Induction have opened an Applications Laboratory, sales, and service facility in Mexico dedicated to Ambrell induction heating products and solutions. Applications from Latin America will be tested in this facility, enabling customers...

1 min read

Induction Heating a Flanged Part Before Welding

A customer had been using an offline oven, but instead wanted the heating to occur within a cell and decided to assess induction as a solution. The application involved heating a Nickel-flanged part (a mold) for a preheat prior to welding application....

1 min read

Induction Heating Three Steel Parts for Bending

A company contacted THE LAB at Ambrell because they needed to heat three steel parts for a bending application and wanted to switch to induction from torch heating. THE LAB determined that an Ambrell EKOHEAT^® 10 kW, 50-150 kHz induction heating system...

1 min read

Forging Silver Bars to Create Collectible Coins

A client contacted THE LAB at Ambrell because they needed to heat silver bars to 1200 ºF (649 ºC) for a forging application. The end product was a collectible coin. THE LAB at Ambrell determined that an EKOHEAT^Ⓡ 125 kW, 2-6 kHz induction heating power...

1 min read

Induction Annealing Brass Contacts

A client contacted THE LAB at Ambrell because they needed to heat brass contacts to 800-1200 ºF (427-649 ºC) for an annealing application. THE LAB determined that an Ambrell EASYHEAT^TM 3.5 kW, 50-150 kHz induction heating system with a single position...

1 min read

Annealing an Aluminum Fuel Tank Fill Neck

A client contacted THE LAB at Ambrell as they needed to anneal aluminum fuel tank fill necks to 650 ºF (343 ºC) for bending. THE LAB determined that an Ambrell EKOHEAT^® 30 kW, 50-150 kHz induction heating system with an eight-turn helical coil would be...